Digital cinema
Digital cinema refers to the adoption of digital technology within the film industry to distribute or project motion pictures as opposed to the historical use of reels of motion picture film, such as 35 mm film. Whereas film reels have to be shipped to movie theaters, a digital movie can be distributed to cinemas in a number of ways: over the Internet or dedicated satellite links, or by sending hard drives or optical discs such as Blu-ray discs.
Digital movies are projected using a digital video projector instead of a film projector, are shot using digital movie cameras or in animation transferred from a file and are edited using a non-linear editing system (NLE). The NLE is often a video editing application installed in one or more computers that may be networked to access the original footage from a remote server, share or gain access to computing resources for rendering the final video, and allow several editors to work on the same timeline or project.
Alternatively a digital movie could be a film reel that has been digitized using a motion picture film scanner and then restored, or, a digital movie could be recorded using a film recorder onto film stock for projection using a traditional film projector.
Digital cinema is distinct from high-definition television and does not necessarily use traditional television or other traditional high-definition video standards, aspect ratios, or frame rates. In digital cinema, resolutions are represented by the horizontal pixel count, usually 2K (2048×1080 or 2.2 megapixels) or 4K (4096×2160 or 8.8 megapixels). The 2K and 4K resolutions used in digital cinema projection are often referred to as DCI 2K and DCI 4K. DCI stands for Digital Cinema Initiatives.
As digital cinema technology improved in the early 2010s, most theaters across the world converted to digital video projection. Digital cinema technology has continued to develop over the years with 3D, RPX, 4DX and ScreenX, allowing moviegoers with more immersive experiences.
History
[edit]The transition from film to digital video was preceded by cinema's transition from analog to digital audio, with the release of the Dolby Digital (AC-3) audio coding standard in 1991.[1] Its main basis is the modified discrete cosine transform (MDCT), a lossy audio compression algorithm.[2] It is a modification of the discrete cosine transform (DCT) algorithm, which was first proposed by Nasir Ahmed in 1972 and was originally intended for image compression.[3] The DCT was adapted into the MDCT by J.P. Princen, A.W. Johnson and Alan B. Bradley at the University of Surrey in 1987,[4] and then Dolby Laboratories adapted the MDCT algorithm along with perceptual coding principles to develop the AC-3 audio format for cinema needs.[1] Cinema in the 1990s typically combined analog photochemical images with digital audio.
Digital media playback of high-resolution 2K files has at least a 20-year history. Early video data storage units (RAIDs) fed custom frame buffer systems with large memories. In early digital video units, the content was usually restricted to several minutes of material. Transfer of content between remote locations was slow and had limited capacity. It was not until the late 1990s that feature-length films could be sent over the "wire" (Internet or dedicated fiber links). On October 23, 1998, Digital Light Processing (DLP) projector technology was publicly demonstrated with the release of The Last Broadcast, the first feature-length movie, shot, edited and distributed digitally.[5][6][7] In conjunction with Texas Instruments, the movie was publicly demonstrated in five theaters across the United States (Philadelphia, Portland (Oregon), Minneapolis, Providence, and Orlando).
Foundations
[edit]In the United States, on June 18, 1999, Texas Instruments' DLP Cinema projector technology was publicly demonstrated on two screens in Los Angeles and New York for the release of Lucasfilm's Star Wars Episode I: The Phantom Menace.[8][9] In Europe, on February 2, 2000, Texas Instruments' DLP Cinema projector technology was publicly demonstrated, by Philippe Binant, on one screen in Paris for the release of Toy Story 2.[10][11]
From 1997 to 2000, the JPEG 2000 image compression standard was developed by a Joint Photographic Experts Group (JPEG) committee chaired by Touradj Ebrahimi (later the JPEG president).[12] In contrast to the original 1992 JPEG standard, which is a DCT-based lossy compression format for static digital images, JPEG 2000 is a discrete wavelet transform (DWT) based compression standard that could be adapted for motion imaging video compression with the Motion JPEG 2000 extension. JPEG 2000 technology was later selected as the video coding standard for digital cinema in 2004.[13]
Initiatives
[edit]On January 19, 2000, the Society of Motion Picture and Television Engineers, in the United States, initiated the first standards group dedicated towards developing digital cinema.[14] By December 2000, there were 15 digital cinema screens in the United States and Canada, 11 in Western Europe, 4 in Asia, and 1 in South America.[15] Digital Cinema Initiatives (DCI) was formed in March 2002 as a joint project of many motion picture studios (Disney, Fox, MGM, Paramount, Sony Pictures, Universal and Warner Bros.) to develop a system specification for digital cinema.[16] The same month it was reported that the number of cinemas equipped with digital projectors had increased to about 50 in the US and 30 more in the rest of the world.[17]
In April 2004, in cooperation with the American Society of Cinematographers, DCI created standard evaluation material (the ASC/DCI StEM material) for testing of 2K and 4K playback and compression technologies. DCI selected JPEG 2000 as the basis for the compression in the system the same year.[18] Initial tests with JPEG 2000 produced bit rates of around 75–125 Mbit/s for 2K resolution and 100–200 Mbit/s for 4K resolution.[13]
Worldwide deployment
[edit]In China, in June 2005, an e-cinema system called "dMs" was established and was used in over 15,000 screens spread across China's 30 provinces. dMs estimated that the system would expand to 40,000 screens in 2009.[19] In 2005 the UK Film Council Digital Screen Network launched in the UK by Arts Alliance Media creating a chain of 250 2K digital cinema systems. The roll-out was completed in 2006. This was the first mass roll-out in Europe. AccessIT/Christie Digital also started a roll-out in the United States and Canada. By mid 2006, about 400 theaters were equipped with 2K digital projectors with the number increasing every month. In August 2006, the Malayalam digital movie Moonnamathoral, produced by Benzy Martin, was distributed via satellite to cinemas, thus becoming the first Indian digital cinema. This was done by Emil and Eric Digital Films, a company based at Thrissur using the end-to-end digital cinema system developed by Singapore-based DG2L Technologies.[20]
In January 2007, Guru became the first Indian film mastered in the DCI-compliant JPEG 2000 Interop format and also the first Indian film to be previewed digitally, internationally, at the Elgin Winter Garden in Toronto. This film was digitally mastered at Real Image Media Technologies in India. In 2007, the UK became home to Europe's first DCI-compliant fully digital multiplex cinemas; Odeon Hatfield and Odeon Surrey Quays (in London), with a total of 18 digital screens, were launched on 9 February 2007. By March 2007, with the release of Disney's Meet the Robinsons, about 600 screens had been equipped with digital projectors. In June 2007, Arts Alliance Media announced the first European commercial digital cinema Virtual Print Fee (VPF) agreements (with 20th Century Fox and Universal Pictures). In March 2009 AMC Theatres announced that it closed a $315 million deal with Sony to replace all of its movie projectors with 4K digital projectors starting in the second quarter of 2009; it was anticipated that this replacement would be finished by 2012.[21]
As digital cinema technology improved in the early 2010s, most theaters across the world converted to digital video projection.[22] In January 2011, the total number of digital screens worldwide was 36,242, up from 16,339 at end 2009 or a growth rate of 121.8 percent during the year.[23] There were 10,083 d-screens in Europe as a whole (28.2 percent of global figure), 16,522 in the United States and Canada (46.2 percent of global figure) and 7,703 in Asia (21.6 percent of global figure). Worldwide progress was slower as in some territories, particularly Latin America and Africa.[24][25] As of 31 March 2015, 38,719 screens (out of a total of 39,789 screens) in the United States have been converted to digital, 3,007 screens in Canada have been converted, and 93,147 screens internationally have been converted.[26] By the end of 2017, virtually all of the world's cinema screens were digital (98%).[27] Digital cinema technology has continued to develop over the years with 3D, RPX, 4DX and ScreenX, allowing moviegoers with more immersive experiences.[28]
Despite the fact that today, virtually all global movie theaters have converted their screens to digital cinemas, some major motion pictures even as of 2019 are shot on film.[29][30] For example, Quentin Tarantino released his latest film Once Upon a Time in Hollywood in 70 mm and 35 mm in selected theaters across the United States and Canada.[31]
Elements
[edit]In addition to the equipment already found in a film-based movie theatre (e.g., a sound reinforcement system, screen, etc.), a DCI-compliant digital cinema requires a DCI-compliant[32] digital projector and a powerful computer known as a server. Movies are supplied to the theatre as a set of digital files called a Digital Cinema Package (DCP).[33] For a typical feature film, these files will be anywhere between 90 GB and 300 GB of data (roughly two to six times the information of a Blu-ray disc) and may arrive as a physical delivery on a conventional computer hard drive or via satellite or fibre-optic broadband Internet.[34] As of 2013, physical deliveries of hard drives were most common in the industry. Promotional trailers arrive on a separate hard drive and range between 200 GB and 400 GB in size.
Regardless of how the DCP arrives, it first needs to be copied onto the internal hard drives of the server, either via a eSATA connection, or via a closed network, a process known as "ingesting."[citation needed] DCPs can be, and in the case of feature films almost always are, encrypted, to prevent illegal copying and piracy. The necessary decryption keys are supplied separately, usually as email attachments or via download, and then "ingested" via USB. Keys are time-limited and will expire after the end of the period for which the title has been booked. They are also locked to the hardware (server and projector) that is to screen the film, so if the theatre wishes to move the title to another screen or extend the run, a new key must be obtained from the distributor.[35] Several versions of the same feature can be sent together. The original version (OV) is used as the basis of all the other playback options. Version files (VF) may have a different sound format (e.g. 7.1 as opposed to 5.1 surround sound) or subtitles. 2D and 3D versions are often distributed on the same hard drive.
The playback of the content is controlled by the server using a "playlist". As the name implies, this is a list of all the content that is to be played as part of the performance. The playlist will be created by a member of the theatre's staff using proprietary software that runs on the server. In addition to listing the content to be played the playlist also includes automation cues that allow the playlist to control the projector, the sound system, auditorium lighting, tab curtains and screen masking (if present), etc. The playlist can be started manually, by clicking the "play" button on the server's monitor screen, or automatically at pre-set times.[36]
Technology and standards
[edit]Digital Cinema Initiatives
[edit]Digital Cinema Initiatives (DCI), a joint venture of the six major studios, published the first version (V1.0) of a system specification for digital cinema in July 2005.[16] The main declared objectives of the specification were to define a digital cinema system that would "present a theatrical experience that is better than what one could achieve now with a traditional 35mm Answer Print", to provide global standards for interoperability such that any DCI-compliant content could play on any DCI-compliant hardware anywhere in the world and to provide robust protection for the intellectual property of the content providers.
The DCI specification calls for picture encoding using the ISO/IEC 15444-1 "JPEG2000" (.j2c) standard and use of the CIE XYZ color space at 12 bits per component encoded with a 2.6 gamma applied at projection. Two levels of resolution for both content and projectors are supported: 2K (2048×1080) or 2.2 MP at 24 or 48 frames per second, and 4K (4096×2160) or 8.85 MP at 24 frames per second. The specification ensures that 2K content can play on 4K projectors and vice versa. Smaller resolutions in one direction are also supported (the image gets automatically centered). Later versions of the standard added additional playback rates (like 25 fps in SMPTE mode). For the sound component of the content the specification provides for up to 16 channels of uncompressed audio using the "Broadcast Wave" (.wav) format at 24 bits and 48 kHz or 96 kHz sampling.
Playback is controlled by an XML-format Composition Playlist, into an MXF-compliant file at a maximum data rate of 250 Mbit/s. Details about encryption, key management, and logging are all discussed in the specification as are the minimum specifications for the projectors employed including the color gamut, the contrast ratio and the brightness of the image. While much of the specification codifies work that had already been ongoing in the Society of Motion Picture and Television Engineers (SMPTE), the specification is important in establishing a content owner framework for the distribution and security of first-release motion-picture content.
National Association of Theatre Owners
[edit]In addition to DCI's work, the National Association of Theatre Owners (NATO) released its Digital Cinema System Requirements.[37] The document addresses the requirements of digital cinema systems from the operational needs of the exhibitor, focusing on areas not addressed by DCI, including access for the visually impaired and hearing impaired, workflow inside the cinema, and equipment interoperability. In particular, NATO's document details requirements for the Theatre Management System (TMS), the governing software for digital cinema systems within a theatre complex, and provides direction for the development of security key management systems. As with DCI's document, NATO's document is also important to the SMPTE standards effort.
E-Cinema
[edit]The Society of Motion Picture and Television Engineers (SMPTE) began work on standards for digital cinema in 2000. It was clear by that point in time that HDTV did not provide a sufficient technological basis for the foundation of digital cinema playback. In Europe, India and Japan however, there is still a significant presence of HDTV for theatrical presentations. Agreements within the ISO standards body have led to these non-compliant systems being referred to as Electronic Cinema Systems (E-Cinema).
Projectors for digital cinema
[edit]Only three manufacturers make DCI-approved digital cinema projectors; these are Barco, Christie and Sharp/NEC. Except for Sony, who used to use their own SXRD technology, all use the Digital Light Processing (DLP) technology developed by Texas Instruments (TI). D-Cinema projectors are similar in principle to digital projectors used in industry, education, and domestic home cinemas, but differ in two important respects. First, projectors must conform to the strict performance requirements of the DCI specification. Second, projectors must incorporate anti-piracy devices intended to enforce copyright compliance such as licensing limits. For these reasons all projectors intended to be sold to theaters for screening current release movies must be approved by the DCI before being put on sale. They now pass through a process called CTP (compliance test plan). Because feature films in digital form are encrypted and the decryption keys (KDMs) are locked to the serial number of the server used (linking to both the projector serial number and server is planned in the future), a system will allow playback of a protected feature only with the required KDM.
DLP Cinema
[edit]Three manufacturers have licensed the DLP Cinema technology developed by Texas Instruments (TI): Christie Digital Systems, Barco, and NEC. While NEC is a relative newcomer to Digital Cinema, Christie is the main player in the U.S. and Barco takes the lead in Europe and Asia.[citation needed] Initially DCI-compliant DLP projectors were available in 2K only, but from early 2012, when TI's 4K DLP chip went into full production, DLP projectors have been available in both 2K and 4K versions. Manufacturers of DLP-based cinema projectors can now also offer 4K upgrades to some of the more recent 2K models.[38] Early DLP Cinema projectors, which were deployed primarily in the United States, used limited 1280×1024 resolution or the equivalent of 1.3 MP (megapixels). Digital Projection Incorporated (DPI) designed and sold a few DLP Cinema units (is8-2K) when TI's 2K technology debuted but then abandoned the D-Cinema market while continuing to offer DLP-based projectors for non-cinema purposes. Although based on the same 2K TI "light engine" as those of the major players they are so rare as to be virtually unknown in the industry. They are still widely used for pre-show advertising but not usually for feature presentations.
TI's technology is based on the use of digital micromirror devices (DMDs).[39] These are MEMS devices that are manufactured from silicon using similar technology to that of computer chips. The surface of these devices is covered by a very large number of microscopic mirrors, one for each pixel, so a 2K device has about 2.2 million mirrors and a 4K device about 8.8 million. Each mirror vibrates several thousand times a second between two positions: In one, light from the projector's lamp is reflected towards the screen, in the other away from it. The proportion of the time the mirror is in each position varies according to the required brightness of each pixel. Three DMD devices are used, one for each of the primary colors. Light from the lamp, usually a Xenon arc lamp similar to those used in film projectors with a power between 1 kW and 7 kW, is split by colored filters into red, green and blue beams which are directed at the appropriate DMD. The 'forward' reflected beam from the three DMDs is then re-combined and focused by the lens onto the cinema screen. Later projectors may use lasers instead of xenon lamps.
Sony SXRD
[edit]Alone amongst the manufacturers of DCI-compliant cinema projectors Sony decided to develop its own technology rather than use TI's DLP technology. SXRD (Silicon X-tal (Crystal) Reflective Display) projectors have only ever been manufactured in 4K form and, until the launch of the 4K DLP chip by TI, Sony SXRD projectors were the only 4K DCI-compatible projectors on the market. Unlike DLP projectors, however, SXRD projectors do not present the left and right eye images of stereoscopic movies sequentially, instead they use half the available area on the SXRD chip for each eye image. Thus during stereoscopic presentations the SXRD projector functions as a sub 2K projector, the same for HFR 3D Content.[40]
However, Sony decided in late April, 2020 that they would no longer manufacture digital cinema projectors.[41][42]
Stereo 3D images
[edit]In late 2005, interest in digital 3D stereoscopic projection led to a new willingness on the part of theaters to co-operate in installing 2K stereo installations to show Disney's Chicken Little in 3D film. Six more digital 3D movies were released in 2006 and 2007 (including Beowulf, Monster House and Meet the Robinsons). The technology combines a single digital projector fitted with either a polarizing filter (for use with polarized glasses and silver screens), a filter wheel or an emitter for LCD glasses. RealD uses a "ZScreen" for polarisation and MasterImage uses a filter wheel that changes the polarity of projector's light output several times per second to alternate quickly the left-and-right-eye views. Another system that uses a filter wheel is Dolby 3D. The wheel changes the wavelengths of the colours being displayed, and tinted glasses filter these changes so the incorrect wavelength cannot enter the wrong eye. XpanD makes use of an external emitter that sends a signal to the 3D glasses to block out the wrong image from the wrong eye.
Laser
[edit]RGB laser projection produces the purest BT.2020 colors and the brightest images.[43]
LED screen for digital cinema
[edit]In Asia, on July 13, 2017, an LED screen for digital cinema developed by Samsung Electronics was publicly demonstrated on one screen at Lotte Cinema World Tower in Seoul.[44] The first installation in Europe is in Arena Sihlcity Cinema in Zürich.[45] These displays do not use a projector; instead they use a LED video wall, and can offer higher contrast ratios, higher resolutions, and overall improvements in image quality. Sony already sells MicroLED displays as a replacement for conventional cinema screens.[46]
Effect on distribution
[edit]Digital distribution of movies has the potential to save money for film distributors. To print an 80-minute feature film can cost US$1,500 to $2,500,[47][failed verification] so making thousands of prints for a wide-release movie can cost millions of dollars. In contrast, at the maximum 250 megabit-per-second data rate (as defined by DCI for digital cinema), a feature-length movie can be stored on an off-the-shelf 300 GB hard drive for $50 and a broad release of 4000 'digital prints' might cost $200,000. In addition hard drives can be returned to distributors for reuse. With several hundred movies distributed every year, the industry saves billions of dollars. The digital-cinema roll-out was stalled by the slow pace at which exhibitors acquired digital projectors, since the savings would be seen not by themselves but by distribution companies. The Virtual Print Fee model was created to address this by passing some of the saving on to the cinemas.[citation needed] As a consequence of the rapid conversion to digital projection, the number of theatrical releases exhibited on film is dwindling. As of 4 May 2014, 37,711 screens (out of a total of 40,048 screens) in the United States have been converted to digital, 3,013 screens in Canada have been converted, and 79,043 screens internationally have been converted.[26]
Telecommunication
[edit]Realization and demonstration, on October 29, 2001, of the first digital cinema transmission by satellite in Europe[48][49][50] of a feature film by Bernard Pauchon,[51] Alain Lorentz, Raymond Melwig[52] and Philippe Binant.[53][54]
Live broadcasting to cinemas or event cinema
[edit]Digital cinemas can deliver live broadcasts from performances or events. This began initially with live broadcasts from the New York Metropolitan Opera delivering regular live broadcasts into cinemas and has been widely imitated ever since. Leading territories providing the content are the UK, the US, France and Germany. The Royal Opera House, Sydney Opera House, English National Opera and others have found new and returning audiences captivated by the detail offered by a live digital broadcast featuring handheld and cameras on cranes positioned throughout the venue to capture the emotion that might be missed in a live venue situation. In addition these providers all offer additional value during the intervals e.g. interviews with choreographers, cast members, a backstage tour which would not be on offer at the live event itself. Other live events in this field include live theatre from NT Live, Branagh Live, Royal Shakespeare Company, Shakespeare's Globe, the Royal Ballet, Mariinsky Ballet, the Bolshoi Ballet and the Berlin Philharmoniker.
In the last ten years this initial offering of the arts has also expanded to include live and recorded music events such as Take That Live, One Direction Live, Andre Rieu, live musicals such as the recent Miss Saigon and a record-breaking Billy Elliot Live In Cinemas. Live sport, documentary with a live question and answer element such as the recent Oasis documentary, lectures, faith broadcasts, stand-up comedy, museum and gallery exhibitions, TV specials such as the record-breaking Doctor Who fiftieth anniversary special The Day Of The Doctor, have all contributed to creating a valuable revenue stream for cinemas large and small all over the world. Subsequently, live broadcasting, formerly known as Alternative Content, has become known as Event Cinema and a trade association now exists to that end. Ten years on the sector has become a sizeable revenue stream in its own right, earning a loyal following amongst fans of the arts, and the content limited only by the imagination of the producers it would seem. Theatre, ballet, sport, exhibitions, TV specials and documentaries are now established forms of Event Cinema. Worldwide estimations put the likely value of the Event Cinema industry at $1bn by 2019.[55]
Event Cinema currently accounts for on average between 1-3% of overall box office for cinemas worldwide but anecdotally it's been reported that some cinemas attribute as much as 25%, 48% and even 51% (the Rio Bio cinema in Stockholm) of their overall box office. It is envisaged ultimately that Event Cinema will account for around 5% of the overall box office globally. Event Cinema saw six worldwide records set and broken over from 2013 to 2015 with notable successes Dr Who ($10.2m in three days at the box office – event was also broadcast on terrestrial TV simultaneously), Pompeii Live by the British Museum, Billy Elliot, Andre Rieu, One Direction, Richard III by the Royal Shakespeare Company.
Event Cinema is defined more by the frequency of events rather than by the content itself. Event Cinema events typically appear in cinemas during traditionally quieter times in the cinema week such as the Monday-Thursday daytime/evening slot and are characterised by the One Night Only release, followed by one or possibly more 'Encore' releases a few days or weeks later if the event is successful and sold out. On occasion more successful events have returned to cinemas some months or even years later in the case of NT Live where the audience loyalty and company branding is so strong the content owner can be assured of a good showing at the box office.
Pros and cons
[edit]Pros
[edit]The digital formation of sets and locations, especially in the time of growing film series and sequels, is that virtual sets, once computer generated and stored, can be easily revived for future films.[56]: 62 Considering digital film images are documented as data files on hard disk or flash memory, varying systems of edits can be executed with the alteration of a few settings on the editing console with the structure being composed virtually in the computer's memory. A broad choice of effects can be sampled simply and rapidly, without the physical constraints posed by traditional cut-and-stick editing.[56]: 63 Digital cinema allows national cinemas to construct films specific to their cultures in ways that the more constricting configurations and economics of customary film-making prevented. Low-cost cameras and computer-based editing software have gradually enabled films to be produced for minimal cost. The ability of digital cameras to allow film-makers to shoot limitless footage without wasting costly film has transformed film production in some Third World countries.[57] From consumers' perspective digital prints do not deteriorate with the number of showings. Unlike film, there is no projection mechanism or manual handling to add scratches or other physically generated artefacts. Provincial cinemas that would have received old prints can give consumers the same cinematographic experience (all other things being equal) as those attending the premiere.
The use of NLEs in movies allows for edits and cuts to be made non-destructively, without actually discarding any footage.
Cons
[edit]A number of high-profile film directors, including Christopher Nolan,[58] Paul Thomas Anderson,[59] David O. Russell[60] and Quentin Tarantino[60] have publicly criticized digital cinema and advocated the use of film and film prints. Most famously, Tarantino has suggested he may retire because, though he can still shoot on film, because of the rapid conversion to digital, he cannot project from 35 mm prints in the majority of American cinemas.[61] Steven Spielberg has stated that though digital projection produces a much better image than film if originally shot in digital, it is "inferior" when it has been converted to digital. He attempted at one stage to release Indiana Jones and the Kingdom of the Crystal Skull solely on film.[62] Paul Thomas Anderson recently was able to create 70-mm film prints for his film The Master [citation needed].
Film critic Roger Ebert criticized the use of DCPs after a cancelled film festival screening of Brian DePalma's film Passion at New York Film Festival as a result of a lockup due to the coding system.[63]
The theoretical resolution of 35 mm film is greater than that of 2K digital cinema.[64][65] 2K resolution (2048×1080) is also only slightly greater than that of consumer based 1080p HD (1920x1080).[66] However, since digital post-production techniques became the standard in the early 2000s, the majority of movies, whether photographed digitally or on 35 mm film, have been mastered and edited at the 2K resolution. Moreover, 4K post production was becoming more common as of 2013. As projectors are replaced with 4K models[67] the difference in resolution between digital and 35 mm film is somewhat reduced.[68] Digital cinema servers utilize far greater bandwidth over domestic "HD", allowing for a difference in quality (e.g., Blu-ray colour encoding 4:2:0 48 Mbit/s MAX datarate, DCI D-Cinema 4:4:4 250 Mbit/s 2D/3D, 500 Mbit/s HFR3D). Each frame has greater detail.
Owing to the smaller dynamic range of digital cameras, correcting poor digital exposures is more difficult than correcting poor film exposures during post-production. A partial solution to this problem is to add complex video-assist technology during the shooting process. However, such technologies are typically available only to high-budget production companies.[56]: 62 Digital cinemas' efficiency of storing images has a downside. The speed and ease of modern digital editing processes threatens to give editors and their directors, if not an embarrassment of choice then at least a confusion of options, potentially making the editing process, with this 'try it and see' philosophy, lengthier rather than shorter.[56]: 63 Because the equipment needed to produce digital feature films can be obtained more easily than film projectors, producers could inundate the market with cheap productions and potentially dominate the efforts of serious directors. Because of the quick speed in which they are filmed, these stories sometimes lack essential narrative structure.[56]: 66–67
Costs
[edit]Pros
[edit]The electronic transferring of digital film, from central servers to servers in cinema projection booths, is an inexpensive process of supplying copies of newest releases to the vast number of cinema screens demanded by prevailing saturation-release strategies. There is a significant saving on print expenses in such cases: at a minimum cost per print of $1200–2000, the cost of film print production is between $5–8 million per movie. With several thousand releases a year, the probable savings offered by digital distribution and projection are over $1 billion.[56]: 67 The cost savings and ease, together with the ability to store film rather than having to send a print on to the next cinema, allows a larger scope of films to be screened and watched by the public; minority and small-budget films that would not otherwise get such a chance.[56]: 67
Cons
[edit]The initial costs for converting theaters to digital are high: $100,000 per screen, on average. Theaters have been reluctant to switch without a cost-sharing arrangement with film distributors. A solution is a temporary Virtual Print Fee system, where the distributor (who saves the money of producing and transporting a film print) pays a fee per copy to help finance the digital systems of the theaters.[69] A theater can purchase a film projector for as little as $10,000[70] (though projectors intended for commercial cinemas cost two to three times that; to which must be added the cost of a long-play system, which also costs around $10,000, making a total of around $30,000–$40,000) from which they could expect an average life of 30–40 years. By contrast, a digital cinema playback system—including server, media block, and projector—can cost two to three times as much,[71] and would have a greater risk of component failure and obsolescence. (In Britain the cost of an entry-level projector including server, installation, etc., would be £31,000 [$50,000].)
Archiving digital masters has also turned out to be both tricky and costly. In a 2007 study, the Academy of Motion Picture Arts and Sciences found the cost of long-term storage of 4K digital masters to be "enormously higher—up to 11 times that of the cost of storing film masters." This is because of the limited or uncertain lifespan of digital storage: No current digital medium—be it optical disc, magnetic hard drive or digital tape—can reliably store a motion picture for as long as a hundred years or more (a timeframe for film properly stored).[72] The short history of digital storage media has been one of innovation and, therefore, of obsolescence. Archived digital content must be periodically removed from obsolete physical media to up-to-date media. The expense of digital image capture is not necessarily less than the capture of images onto film; indeed, it is sometimes greater.[citation needed]
See also
[edit]- Cinematography
- JPEG 2000
- 3D film
- 4K resolution
- Digital cinematography
- Digital projector
- Digital intermediate
- Digital Cinema Initiatives
- Display resolution
- Digital 3D
- Color suite
- List of film-related topics (extensive alphabetical listing)
References
[edit]- ^ a b Britanak, V. (2011). "On Properties, Relations, and Simplified Implementation of Filter Banks in the Dolby Digital (Plus) AC-3 Audio Coding Standards". IEEE Transactions on Audio, Speech, and Language Processing. 19 (5): 1231–1241. doi:10.1109/TASL.2010.2087755. S2CID 897622.
- ^ Andersen, Robert Loring; Crockett, Brett Graham; Davidson, Grant A.; Davis, Mark Franklin; Fielder, Louis D.; Turner, Stephen C.; Vinton, Mark S.; Williams, Phillip (October 2004). "Introduction to Dolby Digital Plus, an Enhancement to the Dolby Digital Coding System" (PDF). Audio Engineering Society Convention (117th AES Convention): 1–29. Archived (PDF) from the original on 2016-06-26. Retrieved 17 October 2019.
- ^ Ahmed, Nasir (January 1991). "How I Came Up With the Discrete Cosine Transform". Digital Signal Processing. 1 (1): 4–5. doi:10.1016/1051-2004(91)90086-Z.
- ^ Princen, J.P.; Johnson, A.W.; Bradley, Alan B. (1987). "Subband/Transform coding using filter bank designs based on time domain aliasing cancellation". ICASSP '87. IEEE International Conference on Acoustics, Speech, and Signal Processing. Vol. 12. pp. 2161–2164. doi:10.1109/ICASSP.1987.1169405. S2CID 58446992.
- ^ "Live via satellite: the first digital premiere | Penn Current". Upenn.edu. 1998-10-15.
- ^ "D Day for Two Digital Movies as "The Cruise" and "The Last Broadcast" Debut in Theaters Today | Filmmakers, Film Industry, Film Festivals, Awards & Movie Reviews". Indiewire.
- ^ "The Last Broadcast". Thelastbroadcastmovie.com.
- ^ Charles S. Swartz (editor), Understanding digital cinema, 2005, p. 159.
- ^ "Star Wars and the Phantom Celluloid". rondiamond.medium.com. 5 November 2022.
- ^ Jean-Michel Frodon and Dina Iordanova (editors), Cinemas of Paris, University of St Andrews, Scotland, 2016, p. 149.
- ^ "Silver Screens - Toy Story en numérique à Paris". www.silverscreens.com.
- ^ Taubman, David; Marcellin, Michael (2012). JPEG2000 Image Compression Fundamentals, Standards and Practice: Image Compression Fundamentals, Standards and Practice. Springer Science & Business Media. ISBN 9781461507994.
- ^ a b Swartz, Charles S. (2005). Understanding Digital Cinema: A Professional Handbook. Taylor & Francis. p. 147. ISBN 9780240806174.
- ^ "SMPTE's Digital Cinema Committee Takes Off Running". MKPE consulting. 2000. Retrieved 2011-10-25.
- ^ "Digital Cinema – Key Figures & Facts" (PDF). 2006-07-23. Archived (PDF) from the original on 2009-01-07.
- ^ a b "DCI Cinema Specification v1.2". Digital Cinema Initiatives. March 7, 2008. Retrieved January 1, 2011.
- ^ Attack Of The Digital Movie
- ^ "ASC-DCI StEM (2004)". IMDb.
- ^ "China Digital Cinema Development Center".
- ^ "Digital movie in Malayalam released". The Hindu. 2006-08-19. Archived from the original on 2006-12-10. Retrieved 2006-08-23.
- ^ Taub, Eric A. (March 29, 2009). "AMC to Get Sony Digital Projectors". New York Times. New York. Retrieved November 19, 2009.
- ^ Leo Barraclough (June 23, 2013). "Digital Cinema Conversion Nears End Game". Variety.
- ^ "Digital Screen Numbers and Forecasts to 2015 are Finalised". IHS Technology. January 26, 2011. Retrieved September 1, 2016.
- ^ Romanek, Neal (2013-02-07). "Inaugural UK Digital Cinema Conference assesses the state of digital cinema | News | Screen". Screendaily.com.
- ^ Persico, Joyce J. (March 19, 2012). "Newtown's old-time movie house looks for revival in the digital age". The Times, Trenton. New Jersey On-Line LLC. Retrieved 2012-04-07.
- ^ a b "Cinema Technologies". natoonline.org. 2013-07-20. Retrieved September 1, 2016.
- ^ "2017 THEME Report" (PDF). Motion Picture Association of America. Archived (PDF) from the original on 2018-04-05.
- ^ "4DX". 4DX.
- ^ "StackPath". www.kodak.com. Retrieved 2019-09-14.
- ^ Rizov, Vadim (24 April 2019). "24 Films Shot on 35mm Released in 2018". Filmmaker Magazine. Retrieved 2019-09-14.
- ^ Brueggemann, Tom (2019-07-24). "Where to See 'Once Upon a Time in Hollywood' on Celluloid, Quentin Tarantino's Preferred Format". IndieWire. Retrieved 2019-09-14.
- ^ "Digital Cinema Initiatives (DCI) - DIGITAL CINEMA SYSTEM SPECIFICATION".
- ^ "The ABCs of DCPs: Unwrapping the Digital Cinema Package". Filmjournal.com. 2012-08-28. Archived from the original on 31 August 2012.
- ^ "DCP-2000 and DCP-2K4 User Manual" (PDF). Archived from the original (PDF) on March 19, 2013.
- ^ MKPE Consulting LLC. "How Digital Cinema Works: Part 4". Mkpe.com.
- ^ "Dolby Screen Server (DSS200)". Dolby.com. Archived from the original on 2014-01-01.
- ^ "NATO Digital Cinema Requirements v2.1" (PDF). December 12, 2008. Archived from the original (PDF) on March 26, 2009. Retrieved November 19, 2009.
- ^ "DLP Cinema Projectors|Christie - Visual Display Solutions". Christiedigital.co.uk.
- ^ "What is Digital Cinema – About Digital Theater - DLP Cinema Technology | DLP – Texas Instruments". Dlp.com.
- ^ "SRX-R515P (SRXR515P) : Specifications : United Kingdom : Sony Professional". Sony.co.uk.
- ^ Nick Dager (April 26, 2020). "Sony to Stop Manufacturing Digital Cinema Projectors". digitalcinemareport.com. Retrieved May 6, 2020.
- ^ "4K Digital Cinema Projection". pro.sony. Retrieved 2023-06-28.
- ^ See Binant, Introduction to Laser. From a Physical Point of View (in french Introduction au laser. Du point de vue de la physique, La Lettre, n° 164, Commission Supérieure Technique de l'Image et du Son, Paris, 2017, p. 9-13. Archived 2018-04-03 at the Wayback Machine)
- ^ "Samsung Debuts World's First Cinema LED Display". Samsung US Newsroom. July 12, 2017.
- ^ "Samsung Debuts World's First 3D Cinema LED Screen Theater in Switzerland". news.samsung.com. Retrieved 2018-07-10.
- ^ "Sony's Crystal cinema display supports 16K, but could cost millions".
- ^ Frazer, Bryant. Animating a Personal Flash Epic. Studio Daily. May 22, 2008. Accessed on: May 22, 2008.
- ^ France Télécom, Commission Supérieure Technique de l'Image et du Son, Communiqué de presse, Paris, October 29th, 2001.
- ^ ""Numérique : le cinéma en mutation", Projections, 13, CNC, Paris, September 2004, p. 7" (PDF). Archived (PDF) from the original on 2013-06-03.
- ^ Bomsel, Olivier; Blanc, Gilles Le (December 27, 2002). Dernier tango argentique. Presses des MINES. ISBN 9782911762420 – via Google Books.
- ^ "France Telecom". authorSTREAM. Archived from the original on 2019-04-20. Retrieved 2013-12-30.
- ^ Georgescu, Alexandru; Gheorghe, Adrian V.; Piso, Marius-Ioan; Katina, Polinpapilinho F. (March 25, 2019). Critical Space Infrastructures: Risk, Resilience and Complexity. Springer. ISBN 9783030126049 – via Google Books.
- ^ "Actualités". 01net.
- ^ "Datacom module 1: Introduction to Data Communications". February 20, 2015.
- ^ "Event Cinema in European cinemas" (PDF). IHS Screen Digest (Report). 2013. Archived from the original (PDF) on May 13, 2014. Retrieved September 1, 2016.
- ^ a b c d e f g Creeber, Glen; Martin, Royston (2009). Digital Culture: Understanding New Media. Open University Press. ISBN 978-0-335-22197-4.
- ^ Creeber, Glen; Martin, Royston. (2009). Digital Culture: Understanding New Media. Open University Press. p. 66. ISBN 978-0-335-22197-4.
- ^ Merchan, George (2012-04-15). "Christopher Nolan talks film vs. digital, his take on CGI, his disinterest in 3D, and much more in insightful DGA interview - Movie News". JoBlo.com.
- ^ "pta on digital vs. film". YouTube. 2006-08-10. Archived from the original on 2021-12-11.
- ^ a b Galloway, Stephen; Belloni, Matthew (November 28, 2012). "Director Roundtable: 6 Auteurs on Tantrums, Crazy Actors and Quitting While They're Ahead". The Hollywood Reporter. Retrieved November 10, 2014.
- ^ "Quentin Tarantino: 'I can't stand digital filmmaking, it's TV in public' - Movies News". Digital Spy. 2012-11-30.
- ^ "Steven Spielberg on Digital Cinema". YouTube. Archived from the original on 2021-12-11.
- ^ "Digital Projection Mishap Derails Premiere of De Palma's "Passion" at New York Film Festival - EntertainmentTell". Technologytell.com.
- ^ "Resolution of 35mm film and 70mm IMAX film?". Reduser.net.
- ^ Laemmle, Robert (2004). The Movie Business Book, Third Edition - The Independent Exhibitor. Simon & Schuster. ISBN 0-7432-1937-6.
- ^ "2K vs 1080p resolution question [Archive". REDUSER.net.
- ^ Boxoffice Media, Llc. "BoxOffice® — SONY'S DIGITAL CINEMA MOMENTUM CONTINUES WITH RECORD NUMBER OF 4K PROJECTORS SHIPPED; EIGHT YEARS OF CONTINUOUS GROWTHBoxOffice® — News". Boxoffice.com. Archived from the original on 2013-11-13.
- ^ "How many pixels are there in a frame of 35mm film?". Technologytell.com. Archived from the original on 2015-08-12.
- ^ AAM VPF. "AAM VPF". AAM.
- ^ "Westar Cfec 105 x 35 mm Projection System New Unused". eBay. 2012-04-17.
- ^ "DLP 3 Chip Projectors". Projector Reviews.
- ^ The Digital Dilemma. Strategic issues in archiving and accessing digital motion picture materials. Academy of Motion Picture Arts and Sciences. 2007.
Bibliography
[edit]- (in English) Charles S. Swartz (editor), Understanding digital cinema. A professional handbook, Elseiver / Focal Press, Burlington, Oxford, 2005, xvi + 327 p. ISBN 0-240-80617-4
- (in French) Philippe Binant (propos recueillis par Dominique Maillet), « Kodak. Au cœur de la projection numérique », Actions, n° 29, Division Cinéma et Télévision Kodak, Paris, 2007, p. 12–13. ISSN 1271-1519
Filmography
[edit]- (in English) Christopher Kenneally, Side by Side, 2012. IMDb